This paper describes a lumped parameter numerical model which is able to simulate the transient as well as the steady-state operation of a sintered heat pipe. The main objective of the work is to build a simple, engineering-approach simulation tool to define the HP characteristics of small HPs, which are now in the market with doubtful specifications. The code has been validated by comparisons with numerical and experimental results readily available from the open literature and an extensive numerical simulation campaign has been carried out in order to characterize the thermal–hydraulic behavior of mini heat pipes. This analysis focuses particularly on the effects of wick thickness, porosity, grain structure and void fraction level in the evaporator on thermal performance and working limits. Mini HPs with different dimensions (8, 5 and 3 mm outer diameter, 1 mm wall thickness, sintered copper wick, water as filling fluid) have been considered. It was found that there is an optimum wick thickness which minimizes the thermal resistance with no remarkable grain radius effect, while, as expected, the grain size affects the evaporator wick dryness.

Lumped parameter model of sintered heat pipe: transient numerical analysis and validation

FERRANDI, Claudio;IORIZZO, Filomena;MAMELI, Mauro;ZINNA, Stefano;MARENGO, Marco
2013-01-01

Abstract

This paper describes a lumped parameter numerical model which is able to simulate the transient as well as the steady-state operation of a sintered heat pipe. The main objective of the work is to build a simple, engineering-approach simulation tool to define the HP characteristics of small HPs, which are now in the market with doubtful specifications. The code has been validated by comparisons with numerical and experimental results readily available from the open literature and an extensive numerical simulation campaign has been carried out in order to characterize the thermal–hydraulic behavior of mini heat pipes. This analysis focuses particularly on the effects of wick thickness, porosity, grain structure and void fraction level in the evaporator on thermal performance and working limits. Mini HPs with different dimensions (8, 5 and 3 mm outer diameter, 1 mm wall thickness, sintered copper wick, water as filling fluid) have been considered. It was found that there is an optimum wick thickness which minimizes the thermal resistance with no remarkable grain radius effect, while, as expected, the grain size affects the evaporator wick dryness.
journal article - articolo
2013
Ferrandi, Claudio; Iorizzo, Filomena; Mameli, Mauro; Zinna, Stefano; Marengo, Marco
File allegato/i alla scheda:
Non ci sono file allegati a questa scheda.
Pubblicazioni consigliate

Aisberg ©2008 Servizi bibliotecari, Università degli studi di Bergamo | Terms of use/Condizioni di utilizzo

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10446/28855
Citazioni
  • Scopus 61
  • ???jsp.display-item.citation.isi??? 50
social impact