The primary task of machine tools is simultaneously positioning and orienting the cutting tool with respect to the work piece. The mechanism must avoid positioning errors, and limit forces and torques required to the motors. A novel approach for combined design and control of manufacturing means is proposed in this work. The focus is on the optimization of the control logic of a redundant 6 axis milling machine, derived from the 5 axis milling machine by adding redundant degree of freedom to the work piece table. The new mechanism is able to fulfill a secondary task due to the introduction of redundancy. The proposed methodology sets as secondary task the minimization of the rotary motors torque, or the minimization of the norm of the positioning error. The control is based on the solution of a constrained optimization problem, where the constraints equations are the kinematic closure equations, and the objective function is the table motor torque or the positioning error of the tool tip. The implementation of this framework in the virtual machine model of the mechanism shows an improvement of the performances: actually, the introduction of a redundant axis allows the minimization of the torques and position errors.

(2021). The optimization of the control logic of a redundant six axis milling machine [journal article - articolo]. In JOURNAL OF INTELLIGENT MANUFACTURING. Retrieved from http://hdl.handle.net/10446/168278

The optimization of the control logic of a redundant six axis milling machine

Caputi, Antonio;Russo, Davide
2021-01-01

Abstract

The primary task of machine tools is simultaneously positioning and orienting the cutting tool with respect to the work piece. The mechanism must avoid positioning errors, and limit forces and torques required to the motors. A novel approach for combined design and control of manufacturing means is proposed in this work. The focus is on the optimization of the control logic of a redundant 6 axis milling machine, derived from the 5 axis milling machine by adding redundant degree of freedom to the work piece table. The new mechanism is able to fulfill a secondary task due to the introduction of redundancy. The proposed methodology sets as secondary task the minimization of the rotary motors torque, or the minimization of the norm of the positioning error. The control is based on the solution of a constrained optimization problem, where the constraints equations are the kinematic closure equations, and the objective function is the table motor torque or the positioning error of the tool tip. The implementation of this framework in the virtual machine model of the mechanism shows an improvement of the performances: actually, the introduction of a redundant axis allows the minimization of the torques and position errors.
articolo
2021
Caputi, Antonio; Russo, Davide
(2021). The optimization of the control logic of a redundant six axis milling machine [journal article - articolo]. In JOURNAL OF INTELLIGENT MANUFACTURING. Retrieved from http://hdl.handle.net/10446/168278
File allegato/i alla scheda:
File Dimensione del file Formato  
Caputi-Russo2020_Article_TheOptimizationOfTheControlLog.pdf

accesso aperto

Versione: publisher's version - versione editoriale
Licenza: Creative commons
Dimensione del file 2.46 MB
Formato Adobe PDF
2.46 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

Aisberg ©2008 Servizi bibliotecari, Università degli studi di Bergamo | Terms of use/Condizioni di utilizzo

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10446/168278
Citazioni
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 3
social impact