In this study, the influence of geometric factors such as hole diameter (D), length-to-diameter ratio (L/D), injection angle (α), and lateral expansion angle (β) on film cooling effectiveness of holes made using electrical discharge machining (EDM) is experimentally investigated. Nine different cooling configurations were tested on a flat plate wind tunnel at various coolant Reynolds number (Rec) and coolant-to-mainstream blowing ratio (M). The considered flat plate model incorporates engine-sized V-shaped holes. EDM reliability is assessed through a hole qualification process, while effectiveness was measured by the pressure-sensitive paint (PSP) technique. Results confirm the suitability of EDM for V-shaped hole manufacturing as long as a correct tolerance on β is prescribed. An accurate qualification of hole morphology is also recommended.

(2022). Film Cooling Effectiveness Measurement of Fan-Shaped Holes Manufactured Using Electrical Discharge Machining Technique [journal article - articolo]. In JOURNAL OF TURBOMACHINERY. Retrieved from http://hdl.handle.net/10446/228877

Film Cooling Effectiveness Measurement of Fan-Shaped Holes Manufactured Using Electrical Discharge Machining Technique

Rouina, Samaneh;Abdeh, Hamed;Barigozzi, Giovanna;
2022-01-01

Abstract

In this study, the influence of geometric factors such as hole diameter (D), length-to-diameter ratio (L/D), injection angle (α), and lateral expansion angle (β) on film cooling effectiveness of holes made using electrical discharge machining (EDM) is experimentally investigated. Nine different cooling configurations were tested on a flat plate wind tunnel at various coolant Reynolds number (Rec) and coolant-to-mainstream blowing ratio (M). The considered flat plate model incorporates engine-sized V-shaped holes. EDM reliability is assessed through a hole qualification process, while effectiveness was measured by the pressure-sensitive paint (PSP) technique. Results confirm the suitability of EDM for V-shaped hole manufacturing as long as a correct tolerance on β is prescribed. An accurate qualification of hole morphology is also recommended.
articolo
2022
Rouina, Samaneh; Abdeh, Hamed; Barigozzi, Giovanna; Odemondo, Vittorio; Abba, Luca; Iannone, Matteo
(2022). Film Cooling Effectiveness Measurement of Fan-Shaped Holes Manufactured Using Electrical Discharge Machining Technique [journal article - articolo]. In JOURNAL OF TURBOMACHINERY. Retrieved from http://hdl.handle.net/10446/228877
File allegato/i alla scheda:
File Dimensione del file Formato  
turbo_144_7_071008.pdf

Solo gestori di archivio

Versione: publisher's version - versione editoriale
Licenza: Licenza default Aisberg
Dimensione del file 1.89 MB
Formato Adobe PDF
1.89 MB Adobe PDF   Visualizza/Apri
Pubblicazioni consigliate

Aisberg ©2008 Servizi bibliotecari, Università degli studi di Bergamo | Terms of use/Condizioni di utilizzo

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10446/228877
Citazioni
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 4
social impact